In order to adapt capacitive, high load load frequency voltage test, hippo Electrical Technology Co., Ltd. the introduction of foreign advanced technology, design and production of various specifications and technical requirements of the resonant reactor. Which is characterized by the system power supply input capacity is small, the output capacity, the inductance adjusting range, waveform distortion. Tuning reactor ball screw mechanical transmission mechanism adopts the form of tuning to ensure maximum stability. Our products are divided into two types, one is used for product testing insulation, dielectric loss values ​​for a large overhead insulated wire and cable and high-capacity generator sets and other test materials, specially designed the System Q value is low (Q = 5-15) is resonant reactor, the other is for the partial discharge test system using resonant reactor, which is characterized by partial discharge, interference level is low, the system equipped with filters, partial discharge tester device, right cross United cable Bureau discharge test. The company can also put forward arguments based on user requirements, design and manufacturing expertise combined type test reactors and FM resonator resonant reactor and other special equipment.

1.Model meaning SRS-□ / □

2. System components and wiring diagram

1-control 2-regulator 3-exciter transformer 4-reactor 5-capacitive divider 6-testing objectThree main technical parameters
● Rated output voltage (UN) :20-350kV

● Rated output capacity :100-7000kVA

● quality factor (Q) :5-80

● Waveform distortion: <0.5%


4 System Features
● The required power capacity is far less than the product of the test volume (typically 5-10%).

● protection performance is good, when the test product breakdown, the resonant condition automatically disappear instantaneous voltage drop, thus avoiding the cable is continuously burned.

● Output voltage waveform is good, waveform distortion rate.